[Accton][as7515-24x] Add new platform #1008
Open
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
CPU: Intel Xeon Processor D-1527
2.2 GHz / 4 core / Cache : 6 MB / TDP : 35 W
BIOS: AMI AptioV BIOS
MAC: Broadcom BCM88284, 1 pcs, 360G Integrated Packet Processor,
Traffic Manager, and Single-Chip Device
PCB: 20-Layers, TU TU883 for Mainboard
16-Layers, TUC TU872LK for CPU module
8-Layers, NP155F for FAN board
8-Layers, Tg-150 for Power board
4-Layers, NP155F for Back Plane board
8-Layers, TU-862HF for Timing board
RAM: 2 * DDR4 SODIMM socket (ECC / Up to 48GB 2133 MHz) Ethernet Management port: 1x RJ-45
Ethernet Ports: 4x QSFP28 + 20x SFP28
Console Port: 1x RJ-45
Power Supply: 12V from PSU * 2pcs
Cooling: 5 pcs of 12V fans, hot-swappable
Dimension: 300 mm (D: Depth) x 438.4 mm (W: Width) x 43.7 mm (H: Height) FPGA: ALTERA 5CGXFC4C6F23I7N, (1pcs, FBGA484 package) CPLD: LATTICE LCMXO3LF-9400C (1 pcs, CABGA484 package) USB Port: 1x USB 3.0 type-C
1PPS Input/Output Port: 1x SMB male connector
10MHz Input/Output port: 1x SMB male connector
TOD Port: 1x RJ-45
GNSS Port: 1x GNSS antenna port
Embedded Controller: IT8528