We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Hi, Is it possible to add this device to a monitoring template?
=== START OF INFORMATION SECTION === Model Family: Innodisk 1IE3/3IE3/3ME3/3IE4/3ME4 SSDs Device Model: CFast 3ME4 Serial Number: LU WWN Device Id: 5 24693e 112009c5e Firmware Version: L20420 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5528 ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jun 18 15:31:46 2024 RTZST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: ( 32) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging NOT supported. General Purpose Logging supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0000 000 000 000 Old_age Offline - 0 2 Throughput_Performance 0x0000 000 000 000 Old_age Offline - 0 5 Later_Bad_Block 0x0012 100 100 001 Old_age Always - 0 7 Seek_Error_Rate 0x0000 000 000 000 Old_age Offline - 0 8 Seek_Time_Performance 0x0000 000 000 000 Old_age Offline - 0 9 Power_On_Hours 0x0012 143 000 000 Old_age Always - 27900 10 Spin_Retry_Count 0x0000 000 000 000 Old_age Offline - 0 12 Power_Cycle_Count 0x0012 035 000 000 Old_age Always - 35 163 Total_Bad_Block_Count 0x0000 000 000 000 Old_age Offline - 8 168 SATA_PHY_Error_Count 0x0000 000 000 000 Old_age Offline - 0 169 Remaining_Lifetime_Perc 0x0000 077 000 000 Old_age Offline - 77 175 Bad_Cluster_Table_Count 0x0000 000 000 000 Old_age Offline - 0 192 Power-Off_Retract_Count 0x0012 000 000 000 Old_age Always - 5 194 Temperature_Celsius 0x0002 050 100 000 Old_age Always - 51 (3 66 0 38 0) 197 Current_Pending_Sector 0x0000 000 000 000 Old_age Offline - 0 225 Data_Log_Write_Count 0x0000 000 000 000 Old_age Offline - 0 240 Write_Head 0x0000 000 000 000 Old_age Offline - 0 165 Max_Erase_Count 0x0012 241 100 000 Old_age Always - 753 167 Average_Erase_Count 0x0012 000 100 000 Old_age Always - 713 170 Spare_Block_Count 0x0013 100 100 010 Pre-fail Always - 144 171 Program_Fail_Count 0x0012 000 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0012 000 100 000 Old_age Always - 0 176 RANGE_RECORD_Count 0x0000 000 000 000 Old_age Offline - 0 184 End-to-End_Error 0x0012 000 000 000 Old_age Always - 0 187 Reported_Uncorrect 0x0012 000 000 000 Old_age Always - 0 229 Flash_ID 0x0000 100 100 000 Old_age Offline - 0x517693943a98 232 Spares_Remaining_Perc 0x0013 000 000 000 Pre-fail Always - 0 235 Later_Bad_Blk_Inf_R/W/E 0x0002 000 000 000 Old_age Always - 0 0 0 241 Host_Writes_32MiB 0x0002 100 100 000 Old_age Always - 1034520 242 Host_Reads_32MiB 0x0002 100 100 000 Old_age Always - 157519 SMART Error Log not supported SMART Self-test Log not supported Selective Self-tests/Logging not supported
The text was updated successfully, but these errors were encountered:
No branches or pull requests
Hi,
Is it possible to add this device to a monitoring template?
The text was updated successfully, but these errors were encountered: